Industrial Automation Magazine India

Industrial IoT Development Kit ARM CPU

Published on : Tuesday 30-11--0001

Designed and manufactured in the USA, the DEV-IOT6U development kit is your IOT starting point. Based on EMAC’s SoM-iMX6U which is an ultra low power System on Module (SoM) plugged into the EMAC SOM-112ES carrier board that contains all the connectors and I/O required for a system. The SoM-iMX6U is based on the Freescale/NXP i.MX6 UltraLite Cortex A7 processor and has ARM Sleep Mode of 3.5mA.

• Freescale ARM Cortex A7 iMX6 UltraLite 528Mhz Processor
• 3.5mA APM Sleep
• Low running power consumption
• 3x serial ports, 3x USB 2.0 ports
• IIoT Gateway processor

Features

• Ultra Low-Power consumption
• 3.5mA APM Sleep, or less.
• Freescale/NXP i.MX6 UltraLite Cortex A7 528Mhz Processor

1. 4 GB of eMMC Flash
2. 16 MB of Serial Data Flash

• MikroBus Expansion
• General I/O: GPIOs, SPI, A/D, D/A, PWM, I2C, I2S

1. 2x serial RS232 ports, 1x USB to Serial & 1x RS232/485 Port
2. DB9 male for COM C, COM A and COM B are 10 Pin IDC headers

• 2x USB 2.0 Host ports

1. 1x micro USB connector for serial console
2. 1x dual USB Type A connector
3. 1x single USB Type A Vertical connector
4. 1x dual row 50-pin .1” GPIO/Misc. Header connector
5. 2x audio in/out jacks
6. 10/100 BaseT Ethernet with onboard Magnetics and RJ45 connector

• Wifi/BT

1. IPEX Antenna included for development.

• CAN 2.0B Port

1. 1x 3-pin polarized locking connector

• Micro SD Card Socket
• Power:

1. 5V DC power,
2. Barrel power jack
3. Standard Molex male floppy power connector for alternate power input

 EMAC, Inc.USA,Tel: 618-529-4525,Email:[email protected]