Needle Dispensing Valves
Published on : Tuesday 30-11--0001
Dispensing valves are used for processing low to high viscosity media. Adjusting the position of the needle in relation to its seat can control the size of the outlet orifice, thus giving control of the flow rate of the material. When fully closed, the needle seals against its seat and is sealed at the throat by an adjustable packing set. The valve is constructed in two separate parts.
This separation of the fluid section from the actuating air section means that it is not possible for any leaking material to flow into the actuating air cylinder, which might otherwise cause a malfunction of the valve. Material passageways can be quickly flushed out if necessary (Internal diameter: 1 - 16).
Product Features
- Small material passageway
- Extremely high opening and closing forces
- Fitted with special adjustable packing
- Double acting pneumatic actuation
- Capable of withstanding high pressures
- Electric or pneumatic control
Options
- Solenoid valve plate
- Manual handle with trigger or foot pedal for pneumatic or electric operation
Technical Specifications
Internal diameter Ø |
Working pressure bar |
Max. working pressure bar |
Weight approx. kg |
---|---|---|---|
1.0 mm |
250 |
315 |
0.20 |
2.0 mm |
250 |
315 |
0.50/0.70 |
2.5 mm |
250 |
315 |
0.50 |
4.0 mm |
40 |
60 |
0.40 |
6.0 mm |
250 |
315 |
1.50 |
12.0 mm |
100 |
315 |
1.60 |
13.0 mm |
200 |
315 |
1.20 |
16.0 mm |
60 |
315 |
3.20 |
DOPAG India Pvt. Ltd,Karnataka,Phone: 080 4092 1332,Email:[email protected]