Industrial Automation Magazine India

10 ±3 mm (White paper 10 ×10 mm)

1 × 4 mm

Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm)

10 to 30 VDC±10% (Ripple (p-p) 10% max.)

960 mW max.
(Reference: Power supply voltage 24 V, Current consumption 40 mA max.)

Load current: 100 mA max. (30 VDC max.)

Operation indicator (orange), RUN indicator (green),
7-segment indicator (white), Key lock indicator (white),
Timer indicator (white), 1-point teaching mode indicator (white)

High when mark is detected.

Power supply reverse polarity protection,
output short-circuit protection and output incorrect connection protection

Operate or reset: 50 μs max. for each (2-point teaching mode)
Operate or reset: 150 μs max. for each (1-point teaching mode)

Teaching method

Incandescent lamp: 3,000 lx max.

Operating: -10 to 55°C; Storage: -25 to 70°C (with no icing or condensation)

Operation: 35% to 85%, Storage: 35% to 95% (with no condensation)

20 MΩ min. (at 500 VDC)

1,000 VAC, 50/60 Hz for 1 min

Destruction: 10 to 55 Hz with double amplitude of 1.5 mm for 2 hours each in X, Y, and Z directions

Destruction: 500 m/s² 3 times each in X, Y, and Z directions

IEC 60529 IP67

M12, 4-pin connector

Approx. 370 g/approx. 320 g

Diecast zinc (nickel-plated brass)

Methacrylic resin (PMMA)

ABS

Elastomers

Diecast zinc (nickel-plated brass)

• Operation mode switching between NO and NC
• Timer function of the control output and timer time selecting function (Select a function from disabled, ON delay, OFF delay, one-shot or ON/OFF delay.) (Select a timer time of 1-5000 ms.)
• Selecting function of ON delay timer time for instability (0 (disabled)-1000 ms)
• Monitor output function (PD output indicating a relative detection quantity)
• Energizing time read-out function (unit: h)
• Initialize the settings function “Restore the factory settings”

Version 1.1

E3S-DCP21-IL3: COM3 (230.4 kbps),
E3S-DCP21-IL2: COM2 (38.4 kbps)

PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

E3S-DCP21-IL3 (COM3): 1.5 ms,
E3S-DCP21-IL2 (COM2): 4.8 ms

Instruction manual