Industrial Automation Magazine India

Rated voltage

200 ... 230 V AC ; 100 … 130 V AC; 50/60 Hz
20 VDC ... 30 VDC

Fusing

external fusing 4 A

Power consumption

AC: < 5 VA
DC: < 5 W

Type

4-digit, 7-segment red display, 7 mm digit height

Display interval

0.002 ... 9999 Hz or
0.01 ... 9999 min^-1

Parameter assignment

keypad-driven menu

Switching state

LED yellow, 3 mm

Connection

terminals 8-, 9+

Connectable sensor types

NAMUR sensors according to DIN EN 60947-5-6

Open loop voltage

8.2 V DC

Short-circuit current

6.5 mA

Switching point

1.2 ... 2.1 mA Switching hysteresis approx. 0.2 mA

Input frequency

0.002 ... 10000 Hz, pulse length/duration: ≥ 20µs

Impedance

1.2 kΩ

Switching point

high: 16 ... 30 V DC; max.10 mA due to integrated constant current sink; R_i ≅ 3 kΩ
low: 0 ... 6 V DC

Input frequency

0.002 ... 40000 Hz, pulse length/duration: ≥ 12µs

Connection

terminals 7+, 13- sensor supply
terminals 14, 15 NPN/PNP input (galvanically isolated)

Connectable sensor types

Two, three, or four-wire proximity switch, incremental rotary encoder, or externally generated pulses 16 ... 30 V

Sensor supply

19 ... 28 V DC non-stabilised; ≤ 30 mA short-circuit protected

Start-up override

Triggering by external signal 16 ... 30 V or Place jumper between terminals 2/3 or by switching on supply voltage (terminal 2 and terminal 3 permanently bridged)

Jumpering time

0.1 ... 999.9 s (External trigger signal)

Relay

1 changeover contact
NO, NC, COM

Sensor supply

24 V DC ± 10 %, 30 mA , short-circuit protected

Contact loading

250 V AC/2 A/ cos φ ≥ 0.7
40 V DC/2 A

Delay

≤ 20 ms (incl. calculation time)

Mechanical life

≥ 30.000.000 switching cycles

Changing interval

5 ms (Internal processing time)

Time delay before availability

≤ 400 ms

Measuring error

0 ... 40000 Hz: ≤ ±0,10%
Display: ±1 digit

Timer function

ON-delay, OFF-delay, one shot, pulse extension

Time

0 ... 999.9 s ; mode of operation reversible

Ambient temperature

-25 ... 40 °C (-13 ... 104 °F)

Storage temperature

-40 ... 85 °C (-40 ... 185 °F)

Relative humidity

max. 80 %, not condensing

Altitude

0 ... 2000 m

Operating conditions

The device has only to be used in an indoor area.

Connection assembly

Caution: Please be aware that the device may only be connected to a switchable power supply. The switch or circuit breaker must be easy to reach and identified as the separator for the device.

Degree of protection

IP20

Connection

coded, removable terminals , max. core cross section 0.34 ... 2.5 mm²

Construction type

modular terminal housing in Makrolon, System KF
For use in the switch cabinet/switch cabinet module

Mounting

snap-on to 35 mm standard rail or screw fixing