E32-T11NF Oil-resistant Fiber
Published on : Tuesday 30-11--0001
No Cutting Oil Ingress by Any Path The Strongest Material Cables with Fluororesin Sheaths
The results of a thorough analysis of the ingress paths of cutting oil show that the deterioration of cable sheaths is a large factor.
The cable sheaths of OMRON’s Oil-resistant Components are made from fluororesin materials to provide maximum protection against the deterioration with a unique new concept. The result is an oil resistance impregnable to even highly aggressive cutting oils.
Fluororesin Blocks Ingress from Cables
Fluororesin, which provides superior resistance to corrosion, is used for the outer cable sheath to suppress cable swelling and deterioration and prevent the ingress of cutting oil into the PCB inside the Sensor.
E32-T11NF Features 3
*The Strongest Material: Based on June 2016 OMRON investigation.
No Cutting Oil Ingress by Any Path Unique Structure
In addition to cable sheaths, joints, and moving sections, cutting oil enters most easily in gaps between different materials. OMRON’ s Oil-resistant Components completely block the ingress of cutting oil with a unique structure that does not allow the creation of gaps.
OMRON’s Unique Structure without Gaps Blocks Oil Ingress
Mechanical Seal Structure
An aluminum ring bushing is compressed and deformed by a set screw to seal the structure by pressing against the fluororesin part of the fiber core. This prevents the ingress of cutting oil from the joined surfaces.
Specifications
Installation Information
Models |
Installation |
Weight |
||
---|---|---|---|---|
Ambient |
Tightening |
Mounting |
||
E32-T11NF 2M |
-25 to 70 °C |
12 N·m |
8.5 +0.5 dia. |
80 |
Models |
Cable |
|||||
---|---|---|---|---|---|---|
Bending |
Unbendable |
Tensile |
Sheath |
Core |
Emitter/receiver |
|
E32-T11NF 2M |
R1 |
0 |
29.4 N |
Fluororesin |
Plastic |
None |
It is used in Oil and Gas Industry,Cable and wire Industry.
Omron Industrial Automation India
Phone:
Email: