Industrial Automation Magazine India

Manual systems- MH20i

Published on : Tuesday 30-11--0001

Manual indexable probe head that combines the TP20 kinematic stylus module mount with two axis indexing, enabling flexible stylus changing and repeatable probe re-orientation.

The A-axis rotates through ±180° in the X-Y plane. The B-axis rotates through 90° in the Z plane. A lever locks the head in one of up to 168 repeatable positions, set at 15° increments.

The head is capable of carrying the full range of TP20 modules, which can be changed without re-qualification, providing qualification has taken place in each position with each stylus / module combination.

Length - 61 mm

Diameter- 48 mm

Weight- 210 g

Probe mounting- TP20 kinematic mount

Head mounting- MS range of shanks

Suitable interface- PI 200-3

Number of probe sockets- 1

Probe status indication- 1 LED

Cable connection- 5 pin DIN 180º socket

A-axis indexing- 0° to 90° in 15° repeatable steps

B-axis indexing- 180° in 15° repeatable steps

Repeatability of position-1.5 µm (0.00006 in) (TP20 and 10 mm stylus fitted)

                                        -2.5 µm (0.0001 in) (EM2 extended module and 10 mm stylus)

Maximum extension bar- EM2 extension module - 75 mm (2.95 in)

Contact:

Renishaw Metrology Systems Ltd.